I'm wonder if this g8 Strut Tower Brace will fit our caprice or not?
http://www.pfyc.com/G84007.html" onclick="window.open(this.href);return false;
does this Strut Tower Brace fit?
-
- Administration Staff
- Posts: 1724
- Joined: Tue Mar 19, 2013 6:30 pm
- Location: Canton GA
Re: does this Strut Tower Brace fit?
yes it does....but REALLY not sure it's the same one, as shown below, which may be Pedders.
I think you can see it here:
http://www.ssforums.com/forum/attachmen ... s7ppv6.jpg" onclick="window.open(this.href);return false;
This is a Caprice PPV with LS7 installed - done by Hendrick Performance in NC
I think you can see it here:
http://www.ssforums.com/forum/attachmen ... s7ppv6.jpg" onclick="window.open(this.href);return false;
This is a Caprice PPV with LS7 installed - done by Hendrick Performance in NC
Bill Harper
inov8r@windstream.net
inov8r@windstream.net
- Crazy Paul
- Posts: 149
- Joined: Fri Apr 26, 2013 1:51 pm
- Location: PERTH, Australia
- Contact:
Re: does this Strut Tower Brace fit?
Whiteline KSB637 Front Brace - strut tower
HOLDEN COMMODORE VE, WM INCL CAPRICE, STATESMAN, UTE & HSV (8/2006-5/2013)
HOLDEN COMMODORE VE, WM INCL CAPRICE, STATESMAN, UTE & HSV (8/2006-5/2013)
- Crazy Paul
- Posts: 149
- Joined: Fri Apr 26, 2013 1:51 pm
- Location: PERTH, Australia
- Contact:
Re: does this Strut Tower Brace fit?
Whiteline and Pedders used to share the same swaybar factory in the DMZ between North and South Korea. Which was great until the bullets and RPG's started whizzing thru the factory.Navy Lifer wrote:yes it does....but REALLY not sure it's the same one, as shown below, which may be Pedders.
I think you'll find the stickers applied to the item will be the only difference.
-
- Posts: 15
- Joined: Thu Dec 03, 2015 9:44 am
Re: does this Strut Tower Brace fit?
is there a factory brace from other car that will fit?
regards,
alex
vectorbundle[AT]gmail[DOT]com
2009 gray CTSV modded 700rwhp
2012 black 9C1 caprice PPV 3.45 diff