New whiteline bushings

Suspension, brake, and hydraulic/electric steering discussion.
Post Reply
User avatar
Fudgehog
Posts: 278
Joined: Sat Aug 19, 2017 2:08 am
Location: Wisconsin

New whiteline bushings

Post by Fudgehog »

I replaced every single front suspension part summer of last year, and was not impressed with the end result.

After getting an alignment the steering was noticeably looser than before.

I decided the only thing left would be hubs/bearings or replace the old rubber strut mounts.

So I did it in a couple hours, in fact I wasn't even halfway through my first beer and I had the passenger side strut in hand.

Observations were as soon as the top nut came off the struts, the thrush bearings were completely disconnected from the mounts, on both sides.

For rubber mounts they were also harder than rocks. One side was harder but I couldn't believe how hard they were.

After driving, the steering is much much tighter, how I like it. The alignment didn't seem to have changed at all, and the ride quality has definitely improved. I'm happy with the result and it was an easy change. Also it handles and corners like a champ.

I know the steering is probably due to the knuckle bolts being torqued tighter but regardless I'm happy.
IMG_20200327_172033.jpg
IMG_20200327_172033.jpg (1.54 MiB) Viewed 3339 times
IMG_20200327_173846.jpg
IMG_20200327_173846.jpg (2 MiB) Viewed 3339 times
Attachments
IMG_20200327_175734.jpg
IMG_20200327_175734.jpg (1.51 MiB) Viewed 3336 times
IMG_20200327_180215.jpg
IMG_20200327_180215.jpg (1.83 MiB) Viewed 3339 times
IMG_20200327_175554.jpg
IMG_20200327_175554.jpg (1.98 MiB) Viewed 3339 times
IMG_20200327_174505.jpg
IMG_20200327_174505.jpg (1.79 MiB) Viewed 3339 times
13 Caprice 6.0L, Solo catback exhaust, 3.27 diff, VCM OTR and Volant throttle spacer, MSD coils plugs wires, transmission pan upgrade and widemouth filter. Camaro 18" rims.

Active Duty USAF
JUNKYARD_JACK
Posts: 134
Joined: Mon May 17, 2021 10:13 am

Re: New whiteline bushings

Post by JUNKYARD_JACK »

I hope I have as good of a result as this produced when I finally get mine in. I believe that only thing I have left that I want to order is new sway bar bushings.
User avatar
Fudgehog
Posts: 278
Joined: Sat Aug 19, 2017 2:08 am
Location: Wisconsin

Re: New whiteline bushings

Post by Fudgehog »

I found out that my front suspension problem is due to loose/busted front control arm bushings. I believe I installed them improper. I'll have to get new ones. Other than that she drives like a beauty.
13 Caprice 6.0L, Solo catback exhaust, 3.27 diff, VCM OTR and Volant throttle spacer, MSD coils plugs wires, transmission pan upgrade and widemouth filter. Camaro 18" rims.

Active Duty USAF
JUNKYARD_JACK
Posts: 134
Joined: Mon May 17, 2021 10:13 am

Re: New whiteline bushings

Post by JUNKYARD_JACK »

I've replaced the radius arm bushings so far, my front lower control arms seem to be okay for now. Hopefully with new front struts/springs/strut mounts/sway bar bushings I'll be 100% better.
Post Reply