Page 2 of 2
Re: BRAKE light stays on with ABS.
Posted: Sat May 11, 2019 8:34 pm
by Mooseman
CrashTestDummy wrote: ↑Sat May 11, 2019 10:53 am
The Elm 327 will NOT read ABS codes.
Well, I'm gonna have to test that out on the Cap. I'll pull the fuse to get a code and see what happens. Like I said, it does work on my TrailBlazer.
Re: BRAKE light stays on with ABS.
Posted: Mon May 20, 2019 2:39 pm
by Mooseman
Well, it must be a Holden thing because I tried it in the Cap and it didn't read them (I pulled the ABS fuse). On my North American made TrailBlazer, it even pulls BCM codes for the missing radio and OnStar module as well as ABS codes.
Re: BRAKE light stays on with ABS.
Posted: Tue May 21, 2019 9:24 am
by CrashTestDummy
It probably is. The box the OBDII reader module came in states:
Works on all 1996 and newer vehicles sold in America
Vehicles sold in Europe: 2001 & newer petrol, 2004 and newer for diesel
Vehicles sold in Australia & NZ: 2006 and newer
I doubt Holden had much incentive or need to be 100% compatible with the US OBDII standard until they started shipping GTOs to the states, and saw opportunity to do more.
Re: BRAKE light stays on with ABS.
Posted: Wed May 22, 2019 10:09 am
by Maximuss
ordering an Innova 3100J and see what happens...