When replacing rear springs, what else should be done?
-
- Posts: 100
- Joined: Sun Mar 30, 2014 9:58 pm
- Location: Seattle, WA
When replacing rear springs, what else should be done?
I'm replacing my front and rear springs and for the front since they'll be apart I'm replacing the strut bushings and bearings. Is there anything I should be replacing in the rear since I'll have them apart too?
1987 Landau (383 stroker, vortec heads, 700r4, posi rear, Bilstein shocks, Eibach springs, Bassett 15x8, BFGoodrich 275/60, 9C1 speedo)
2011 9C3 (K&N CAI, Weldcraft widened 18x9 factory steelies, Bridgestone 285/35)
-
- Posts: 270
- Joined: Fri Aug 12, 2016 7:13 am
- Location: Tampa, FL
Re: When replacing rear springs, what else should be done?
Check the rear sway bar link ball fittings. One of mine was completely separated from the link.
2014 Chevrolet Caprice PPV
2014 Chevrolet Stingray Z51
2016 AMG C63
2015 BMW X5 iDrive 50i
2014 Chevrolet Stingray Z51
2016 AMG C63
2015 BMW X5 iDrive 50i
Re: When replacing rear springs, what else should be done?
Check the lower spring isolators/insulators. The ones on my 5K mile car were a little beat up, so I can imagine a higher mileage car needing replacements.
2011 9C3: 11.48 @118.