Exhaust Cutouts?

[NewToMe2013PPV]

Did you order the 2.25" dia kit from Badlanz?

[SSpeedracer]

Yes. High Performance Low Profile 2.25" Steel Dual with add on turn downs.

https://files.catbox.moe/octjte.jpg

https://files.catbox.moe/3ww6c1.jpg

https://files.catbox.moe/jbyhki.jpg

Longevity has been poor but could be result of having opened and closed while under throttle. Going forward, I'll only actuate while engine is off or idleing.

[NewToMe2013PPV]

Thanks for the pics and advice!

[OgRoar]

Yes. High Performance Low Profile 2.25" Steel Dual with add on turn downs.

https://files.catbox.moe/octjte.jpg

https://files.catbox.moe/3ww6c1.jpg

https://files.catbox.moe/jbyhki.jpg

Longevity has been poor but could be result of having opened and closed while under throttle. Going forward, I'll only actuate while engine is off or idleing.

This looks like the same layout I had on my 2000 Trans-Am LS1 M6 car. The brand was QTP and I had 0 failures in the 40k miles I had the car.

The cutout is really the way to go. My TA had Kooks headers into the cutouts, then to Magnaflow mufflers. It sounded basically stock but with the cutouts open, it roared like open headers.