GM Exhaust tips installed

Discussion on fuel delivery & intake/exhaust tech & mods.
Post Reply
keherrington
Posts: 20
Joined: Sun Mar 30, 2014 2:35 pm

GM Exhaust tips installed

Post by keherrington »

Just finished installing GM exhaust tips on my PC1. They are GM Part# 19165195, but I used a polished stainless steel clamp rather than the one that came with the tips.

Image
Image
Image

Definitely like the look.
Keith
User avatar
Tom Slick
Posts: 559
Joined: Thu Mar 21, 2013 5:27 pm
Location: Midlothian, TX
Contact:

Re: GM Exhaust tips installed

Post by Tom Slick »

How much pipe did you cut back?

Later,
Tom Slick
1932 Glassic Ford Model A Roadster Replica - Ford 302/C4, approx. 1400lb... :-)
2015 GMC Sierra SLE Extended Cab - 5.3L
keherrington
Posts: 20
Joined: Sun Mar 30, 2014 2:35 pm

Re: GM Exhaust tips installed

Post by keherrington »

About 6". The old pipe is about where the weld seam is just next to the rear edge of the Torca Torctite Stainless Steel Lap Joint Band Exhaust Clamp (http://www.ebay.com/itm/171060900477" onclick="window.open(this.href);return false;).

I cut the pipe with a four blade cutting tool (http://www.ebay.com/itm/Exhaust-Pipe-Ta ... 4180ebafc3" onclick="window.open(this.href);return false;). Worked great and only needed a quarter turn - great for tight spaces.

Keith
Tariq
Posts: 59
Joined: Thu Jan 02, 2014 7:36 pm
Location: Riyadh - KSA

Re: GM Exhaust tips installed

Post by Tariq »

IMO, Dual Tip 3" will be HOT

Image
Image
Post Reply