Talking about rotofab

Discussion on fuel delivery & intake/exhaust tech & mods.
s/c'd cav
Posts: 1382
Joined: Mon May 30, 2016 3:12 am
Location: PHOENIX AZ

Re: Talking about rotofab

Post by s/c'd cav »

here are the pics on my 14
Attachments
rotofab 2.jpg
rotofab 2.jpg (229.22 KiB) Viewed 7020 times
rotofab 4.jpg
rotofab 4.jpg (172.57 KiB) Viewed 7020 times
rotofab 3.jpg
rotofab 3.jpg (161.83 KiB) Viewed 7020 times
xcidmigs
Posts: 783
Joined: Fri Feb 13, 2015 8:12 pm
Location: SE PA

Re: Talking about rotofab

Post by xcidmigs »

So am I missing something or that one pic is showing the cutout in the plastic box which is where the Rotofab actually is getting its "cold air" and that's it? How are you guys tricking yourselves into paying for that when there are the multiple different OTR systems out there and really you can almost have the same effect on the rotofab with just some mods on the stock box system as several members did?
s/c'd cav
Posts: 1382
Joined: Mon May 30, 2016 3:12 am
Location: PHOENIX AZ

Re: Talking about rotofab

Post by s/c'd cav »

no !! the opening isnt in the pic !!!

that small hole is where rotofab clearanced my box to fit out headlights , rotofab used my car to test for the 14-17 caprices
Pursuit
Administration Staff
Posts: 969
Joined: Tue Apr 23, 2013 3:39 pm
Location: Omaha, NE area

Re: Talking about rotofab

Post by Pursuit »

S/C'D CAV,
Is that flat plate a divider for use between the engine compartment and the RotoFab CAI? I'm currently using some semi rigid white foam to isolate the CAI form the engine compartment heat. My foam goes all the way down to the horizontal plastic splash panel...

Maurice
Maurice Sheil

mhsheil@gmail.com

2011 Caprice Phantom Black 9C3
2012 Impala 9C1
1995 9C1 Caprice
1996 GMC Sierra C1500
1996 Chevrolet K2500 Extended Cab, long box, 454, 91,000 rust free miles
1974 SJ Grand Prix 455 well optioned with factory moon roof
s/c'd cav
Posts: 1382
Joined: Mon May 30, 2016 3:12 am
Location: PHOENIX AZ

Re: Talking about rotofab

Post by s/c'd cav »

yes it is , it fits along the frame rail and the intake box
Post Reply