Header Help!!

Discussion on fuel delivery & intake/exhaust tech & mods.
CrashTestDummy
Posts: 1723
Joined: Sat Feb 07, 2015 8:31 pm
Location: Pearland, Texas

Re: Header Help!!

Post by CrashTestDummy » Wed Mar 07, 2018 4:58 am

I read good things about ARH on the Tahoe/Yukon forum as well. We’re probably sticking with the OEM manifolds, but if I were going with long tubes, i’d Definitely look at ARH, or JBA, as well as Kooks.
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2010 Tahoe PPV (her car)
1995 DGGM Impala SS
1996 BBB Impala SS (11-second DD)
1985 Firebird - 310 LS1 C Prepared autocross car.
And some others
Do YOU have my SPID?

s/c'd cav
Posts: 505
Joined: Mon May 30, 2016 8:12 am
Location: PHOENIX AZ

Re: Header Help!!

Post by s/c'd cav » Wed Mar 07, 2018 7:31 pm

ive got 2" ARH's sitting and waiting to get ceramic coated , then ill be putting them on the ppv

PPV_Farmer
Posts: 9
Joined: Wed Mar 14, 2018 4:09 pm
Location: MN

Re: Header Help!!

Post by PPV_Farmer » Wed Mar 14, 2018 4:19 pm

Has anybody tried the JBA headers for a SS? There about the cheapest I've yet to find...540 for uncoated and 650 for ti ceramic
2011 9C3

s/c'd cav
Posts: 505
Joined: Mon May 30, 2016 8:12 am
Location: PHOENIX AZ

Re: Header Help!!

Post by s/c'd cav » Wed Mar 14, 2018 4:25 pm

PPV_Farmer wrote:Has anybody tried the JBA headers for a SS? There about the cheapest I've yet to find...540 for uncoated and 650 for ti ceramic
there is quite a few that have used the JBA ss headers

PPV_Farmer
Posts: 9
Joined: Wed Mar 14, 2018 4:09 pm
Location: MN

Re: Header Help!!

Post by PPV_Farmer » Wed Mar 14, 2018 4:30 pm

Any opinions on figment/quality? Sorry if it's been talked about already I'm new here and haven't dug that deep in the forum yet. Thanks
2011 9C3

s/c'd cav
Posts: 505
Joined: Mon May 30, 2016 8:12 am
Location: PHOENIX AZ

Re: Header Help!!

Post by s/c'd cav » Wed Mar 14, 2018 4:33 pm

they are a good part and fit with out having to delete or move the engine oil cooler

User avatar
Mooseman
Posts: 257
Joined: Tue Jun 13, 2017 4:35 am
Location: Ottawa, ON Canada
Contact:

Re: Header Help!!

Post by Mooseman » Thu Mar 15, 2018 1:49 am

Where did you find those prices?
2011 Caprice PPV, 1 of possibly 4 in Canada!
Image

PPV_Farmer
Posts: 9
Joined: Wed Mar 14, 2018 4:09 pm
Location: MN

Re: Header Help!!

Post by PPV_Farmer » Thu Mar 15, 2018 7:25 pm

Jbaspeedshop.com or carparts.com was about the same price on the headers and I think the mid pipe was cheaper... 250 or so I think
2011 9C3

bluethunder
Posts: 119
Joined: Tue Jan 10, 2017 6:43 pm

Re: Header Help!!

Post by bluethunder » Tue May 29, 2018 12:32 am

I have JBA's waiting to go on as soon as I finish up my DOD delete. I will post my experience

bluethunder
Posts: 119
Joined: Tue Jan 10, 2017 6:43 pm

Re: Header Help!!

Post by bluethunder » Tue Jun 05, 2018 1:03 am

JBA's are on. Perfect fit on my 2013. I was able to leave all the bubble wrap and plastic that protected them for shipment on during installation to keep them from getting scratched. Great fit with no issues!

Post Reply