LSA coming together

Tech discussions on the L77 6.0L V8.
User avatar
orgdnr
Posts: 132
Joined: Wed Mar 18, 2015 3:00 pm
Location: Chatsworth California

Re: LSA coming together

Post by orgdnr »

It made some bigger #'s but I wasn't comfortable with the afr. These are on a Dynocom treadmill.

Watch "Caprice ppv dyno rum" on YouTube
Caprice ppv dyno rum: http://youtu.be/0tIKZHzgEFw" onclick="window.open(this.href);return false;
Attachments
20151128_175814.jpg
20151128_175814.jpg (1.58 MiB) Viewed 13669 times
Dave
Chatsworth Ca

2012 9c1 ported LSA kooks 1 7/8 long tubes rotofab cai 575rwhp 570 tq. best repeatable 1/4 mile 11.32
69 Roadrunner 383 A/G 4 sp. bench seat (for sale) no rust
30 model A pickup QMP 383
Built Ford tough with chevy stuff
71 GMC suburban 4X4
Gerome
Posts: 322
Joined: Sun Jan 19, 2014 7:07 pm

Re: LSA coming together

Post by Gerome »

Nice !
User avatar
The Tech
Posts: 283
Joined: Tue Mar 19, 2013 9:34 pm
Location: Mooresville NC

Re: LSA coming together

Post by The Tech »

Yeah, what he said! Nice indeed.
2011 Alto Gray Caprice PPV 9C3, Kooks Long Tube Headers, Kooks Drag Cats and Crossover, Solo Axle Back System.
1996 DGGM Impala SS
1995 Caprice 9C1 red over white
2015 Bright Yellow Jeep Wrangler, the better half's car.
Member of Carolina Holdens
xcidmigs
Posts: 783
Joined: Fri Feb 13, 2015 8:12 pm
Location: SE PA

Re: LSA coming together

Post by xcidmigs »

Wheres the update? I've bitten my fingernails back to bone at this point waiting for this mythical parts list and answers to other questions like "what cam or exhaust is on this?"

:shock: :shock: :shock: :shock:
User avatar
orgdnr
Posts: 132
Joined: Wed Mar 18, 2015 3:00 pm
Location: Chatsworth California

Re: LSA coming together

Post by orgdnr »

I'll get on the parts list in due time. Keep your fingers on!. Had to make and intake pipe as the 4"silicone collapsed and caused a p1516 fault shutting the car down. I'll make a nice tube with the cartridge maf. The car is getting 15 mpg with me doing burnouts and full throttle runs at every freeway onramp. Indicated is 23 at 75 mph but with injector and stoic scaling I'll have to run a tank on the highway to be sure. Next is an LS7 MAF and tune to match after I race

The exhaust is Kooks 1 7/8 for chevy SS green cats and JHP cans. The IAT's are 5* higher with the rotofab cai than an open filter. I will pull the foglamp filler and recheck. The cam is a .610/.613 .223/227@.050 on a 112 lsa +0 installed straight up custom grind my buddy has done through comp cams

Racing the redlist series 12-12. I will update with 1/4 mile stats
Attachments
20151205_190458.jpg
20151205_190458.jpg (839.3 KiB) Viewed 13641 times
Dave
Chatsworth Ca

2012 9c1 ported LSA kooks 1 7/8 long tubes rotofab cai 575rwhp 570 tq. best repeatable 1/4 mile 11.32
69 Roadrunner 383 A/G 4 sp. bench seat (for sale) no rust
30 model A pickup QMP 383
Built Ford tough with chevy stuff
71 GMC suburban 4X4
xcidmigs
Posts: 783
Joined: Fri Feb 13, 2015 8:12 pm
Location: SE PA

Re: LSA coming together

Post by xcidmigs »

i just dropped my beer reading this...

THANKS ALOT SIR

I can't believe the MPG you post considering i have a stock motor which i regularly beat yes but also have to just cruise normal speeds as i drive around town etc... I've never seen averages higher than 14mpg over 1000 miles or so and on the freeway i have to ask someone else to drive to keep it in the 23-24mpg range with the stupid AFM kicking in and out.
What does that cam sound like idling??
S13REMI
Posts: 123
Joined: Sun Oct 11, 2015 11:59 am

Re: LSA coming together

Post by S13REMI »

SUBSCRIBED!!! this has been in the plans for awhile. Unfortuanetly i think DOD delete and cam are gonna be it for this winter though.
2012 CAPRICE 460WHP! NIGHT FURY CAM, LONG TUBES, OTR INTAKE, NEW ERA TUNE, COILOVERS, C6 Z06 WHEELS. (BIGGEST EVER ON A CAPRICE)
Image
User avatar
orgdnr
Posts: 132
Joined: Wed Mar 18, 2015 3:00 pm
Location: Chatsworth California

Re: LSA coming together

Post by orgdnr »

Blew 4th gear out of the trany. All dressed up and nothing to race. My next thread will be 6L80 upgrades and overhaul unfortunately!
Attachments
20151212_082423.jpg
20151212_082423.jpg (1.08 MiB) Viewed 13608 times
Dave
Chatsworth Ca

2012 9c1 ported LSA kooks 1 7/8 long tubes rotofab cai 575rwhp 570 tq. best repeatable 1/4 mile 11.32
69 Roadrunner 383 A/G 4 sp. bench seat (for sale) no rust
30 model A pickup QMP 383
Built Ford tough with chevy stuff
71 GMC suburban 4X4
CrashTestDummy
Posts: 2301
Joined: Sat Feb 07, 2015 2:31 pm
Location: Pearland, Texas

Re: LSA coming together

Post by CrashTestDummy »

Oops!!

But on the plus side, it's not a $50,000 SS that would now have the warranty voided.
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
User avatar
orgdnr
Posts: 132
Joined: Wed Mar 18, 2015 3:00 pm
Location: Chatsworth California

Re: LSA coming together

Post by orgdnr »

With purchase price and mods I'm just about 25K. Working a deal on the trany parts so a few hundies and my labor, back at it! I should have upgraded the trans first and made the race but oh well.
Dave
Chatsworth Ca

2012 9c1 ported LSA kooks 1 7/8 long tubes rotofab cai 575rwhp 570 tq. best repeatable 1/4 mile 11.32
69 Roadrunner 383 A/G 4 sp. bench seat (for sale) no rust
30 model A pickup QMP 383
Built Ford tough with chevy stuff
71 GMC suburban 4X4
Post Reply