LSA coming together
- eagle-co94
- Posts: 306
- Joined: Fri Oct 04, 2013 4:47 pm
- Location: Bloomington, Indiana
Re: LSA coming together
How's that list coming?
I have 3 questions for you:
1. What fuel system upgrades are you doing other than injectors ?
2. Is there any issue using your stock power steering pump as I believe the ZL1 and V use an electric pump.
3. Who's doing your tuning?
I have 3 questions for you:
1. What fuel system upgrades are you doing other than injectors ?
2. Is there any issue using your stock power steering pump as I believe the ZL1 and V use an electric pump.
3. Who's doing your tuning?
-James . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . "Life without knowledge is death in disguise."
Re: LSA coming together
The list is becoming long and expensive. Right now I just have a pile of receipts.
I'm working on a dual pump system that fits in our modules.
The pump is fine but the reservoir will need to be relocated to the unused post next to the cai.
I would like to employ the help of Rein Cunningham in Murrieta Ca. As I want to be able to use an ethanol mix. I'm an ok tuner but this guy come highly recommend by some of the best.
I'm working on a dual pump system that fits in our modules.
The pump is fine but the reservoir will need to be relocated to the unused post next to the cai.
I would like to employ the help of Rein Cunningham in Murrieta Ca. As I want to be able to use an ethanol mix. I'm an ok tuner but this guy come highly recommend by some of the best.
Dave
Chatsworth Ca
2012 9c1 ported LSA kooks 1 7/8 long tubes rotofab cai 575rwhp 570 tq. best repeatable 1/4 mile 11.32
69 Roadrunner 383 A/G 4 sp. bench seat (for sale) no rust
30 model A pickup QMP 383
Built Ford tough with chevy stuff
71 GMC suburban 4X4
Chatsworth Ca
2012 9c1 ported LSA kooks 1 7/8 long tubes rotofab cai 575rwhp 570 tq. best repeatable 1/4 mile 11.32
69 Roadrunner 383 A/G 4 sp. bench seat (for sale) no rust
30 model A pickup QMP 383
Built Ford tough with chevy stuff
71 GMC suburban 4X4
Re: LSA coming together
Ha ha!!
Bob Dannelley
2011 Alto Gray 9C3 Caprice PPV-Maggie-11.64@119.68-Sold!
1995 DCM Impala SS-409-Stroker!-11.83@115
2014 Silver Ice LTZ Silverado Crewcab 4X4
2007 Black Z51 M6-Corvette Coupe
2011 Alto Gray 9C3 Caprice PPV-Maggie-11.64@119.68-Sold!
1995 DCM Impala SS-409-Stroker!-11.83@115
2014 Silver Ice LTZ Silverado Crewcab 4X4
2007 Black Z51 M6-Corvette Coupe
Re: LSA coming together
I have the crank pulley pinned and installed. Tensioner and idlers in. Took the week off so supercharger and fuelpump install this weekend. Adding a walbro 450lph on a 3psi relayed switch. Pump basket mods to be determined when I get it out.
First attempt at pinning the crank broke the bit. Start slow until you get past the balancer lip. An LS7 installer adapter is required with the ATI balancer. A blower pulley spacer works well as a bearing guide.
Pn list will get figured out when I'm done. The car should gain 2 tenths just from my wallet being so light.
On the truck scale yesterday 3/4 tank with camaro wheels was 4480# with me.
First attempt at pinning the crank broke the bit. Start slow until you get past the balancer lip. An LS7 installer adapter is required with the ATI balancer. A blower pulley spacer works well as a bearing guide.
Pn list will get figured out when I'm done. The car should gain 2 tenths just from my wallet being so light.
On the truck scale yesterday 3/4 tank with camaro wheels was 4480# with me.
- Attachments
-
- 20151113_131951.jpg (1.04 MiB) Viewed 14686 times
-
- 20151113_135757.jpg (989.67 KiB) Viewed 14686 times
Dave
Chatsworth Ca
2012 9c1 ported LSA kooks 1 7/8 long tubes rotofab cai 575rwhp 570 tq. best repeatable 1/4 mile 11.32
69 Roadrunner 383 A/G 4 sp. bench seat (for sale) no rust
30 model A pickup QMP 383
Built Ford tough with chevy stuff
71 GMC suburban 4X4
Chatsworth Ca
2012 9c1 ported LSA kooks 1 7/8 long tubes rotofab cai 575rwhp 570 tq. best repeatable 1/4 mile 11.32
69 Roadrunner 383 A/G 4 sp. bench seat (for sale) no rust
30 model A pickup QMP 383
Built Ford tough with chevy stuff
71 GMC suburban 4X4
Re: LSA coming together
Can we meet get a ballpark figure on cost ? I know you are going to do a detail one later , a nice round about number would be nice .
Re: LSA coming together
Im in to it about 2k plus the SC. I bought a blem balancer direct from ATI on ebay for $269 (normally 550). I got delayed doing the install because the trucks heatercore took a dump and the whole dash comes out to replace it.
Dave
Chatsworth Ca
2012 9c1 ported LSA kooks 1 7/8 long tubes rotofab cai 575rwhp 570 tq. best repeatable 1/4 mile 11.32
69 Roadrunner 383 A/G 4 sp. bench seat (for sale) no rust
30 model A pickup QMP 383
Built Ford tough with chevy stuff
71 GMC suburban 4X4
Chatsworth Ca
2012 9c1 ported LSA kooks 1 7/8 long tubes rotofab cai 575rwhp 570 tq. best repeatable 1/4 mile 11.32
69 Roadrunner 383 A/G 4 sp. bench seat (for sale) no rust
30 model A pickup QMP 383
Built Ford tough with chevy stuff
71 GMC suburban 4X4
Re: LSA coming together
Thats not to bad ! Pretty reasonable considering the hp you will have when done .
Re: LSA coming together
Spent the day getting her together. Working on a mass air solution and getting the HX pump bled is provong to be a challenge. Have a bunch of clean up stuff as well ( heater hosed, coils, pcv etc)
- Attachments
-
- 20151125_211836.jpg (995.23 KiB) Viewed 14650 times
-
- 20151125_150923.jpg (929.33 KiB) Viewed 14650 times
Dave
Chatsworth Ca
2012 9c1 ported LSA kooks 1 7/8 long tubes rotofab cai 575rwhp 570 tq. best repeatable 1/4 mile 11.32
69 Roadrunner 383 A/G 4 sp. bench seat (for sale) no rust
30 model A pickup QMP 383
Built Ford tough with chevy stuff
71 GMC suburban 4X4
Chatsworth Ca
2012 9c1 ported LSA kooks 1 7/8 long tubes rotofab cai 575rwhp 570 tq. best repeatable 1/4 mile 11.32
69 Roadrunner 383 A/G 4 sp. bench seat (for sale) no rust
30 model A pickup QMP 383
Built Ford tough with chevy stuff
71 GMC suburban 4X4
Re: LSA coming together
Coming together nicely ! I plan to use all the tips and short cuts you come up with lol . We will need a video when you get done .
Re: LSA coming together
Just lit her off. I've got quite a bit more tuning to do. Even after adjusting the IFR she is still pig rich. On the dyno tomorrow afternoon.
Dave
Chatsworth Ca
2012 9c1 ported LSA kooks 1 7/8 long tubes rotofab cai 575rwhp 570 tq. best repeatable 1/4 mile 11.32
69 Roadrunner 383 A/G 4 sp. bench seat (for sale) no rust
30 model A pickup QMP 383
Built Ford tough with chevy stuff
71 GMC suburban 4X4
Chatsworth Ca
2012 9c1 ported LSA kooks 1 7/8 long tubes rotofab cai 575rwhp 570 tq. best repeatable 1/4 mile 11.32
69 Roadrunner 383 A/G 4 sp. bench seat (for sale) no rust
30 model A pickup QMP 383
Built Ford tough with chevy stuff
71 GMC suburban 4X4