Page 1 of 2
Turbo
Posted: Tue Mar 17, 2020 3:09 pm
by landcrush
I’ve only seen one member on here with a turbo build. Anybody else done it on a caprice?
I’ve seen a few twin set ups on G8s, interested in any single turbo builds.
Re: Turbo
Posted: Tue Mar 17, 2020 9:25 pm
by RM96
Not sure if the owner of the car is a member of this forum, but HunterTuned on YouTube had a couple videos dialing in a single turbo Caprice.
https://www.youtube.com/channel/UCanabQ ... ry=caprice
Re: Turbo
Posted: Wed Mar 18, 2020 9:21 am
by Oldblue68chevy
There is also a thread over on LS1 Tech in the forced induction forum of a PPV being built.
Re: Turbo
Posted: Wed Mar 18, 2020 4:46 pm
by CrashTestDummy
Over in the Member Builds section, first or second thread:
http://www.newcaprice.com/forum/viewtop ... =36&t=3205
Re: Turbo
Posted: Sun Mar 29, 2020 9:56 am
by undrcvrppv
I'll be finishing mine up in the next couple weeks just working the bugs out now. I bought the kit from cartuning.ca it is ment for a g8 so there was a little bit of modification needed but not much and I documented everything and sent the kit builder pictures
Re: Turbo
Posted: Tue Mar 31, 2020 12:11 pm
by landcrush
undrcvrppv wrote: ↑Sun Mar 29, 2020 9:56 am
I'll be finishing mine up in the next couple weeks just working the bugs out now. I bought the kit from cartuning.ca it is ment for a g8 so there was a little bit of modification needed but not much and I documented everything and sent the kit builder pictures
That kit looks high quality. I’m just looking to get some design ideas layout etc. Does the crossover run under the trans or around the front ?
Re: Turbo
Posted: Tue Mar 31, 2020 12:15 pm
by undrcvrppv
Under the trans definitely a higher priced kit but well worth it for the quality of parts and fab work
Re: Turbo
Posted: Wed Nov 18, 2020 2:34 pm
by Turbopowered68
undrcvrppv wrote: ↑Tue Mar 31, 2020 12:15 pm
Under the trans definitely a higher priced kit but well worth it for the quality of parts and fab work
have you done a write up thread on your build?
If so please post a link.
Re: Turbo
Posted: Wed Nov 18, 2020 6:26 pm
by undrcvrppv
Have not done a write up yet. Will try to post something tonight
Re: Turbo
Posted: Sat Apr 24, 2021 8:48 am
by rustybullet
what were you looking to do.
i have a 14' ss thats going twin turbo, i made my own kit using agp manifold adapters.