Procharger install 2013 9C3

Tech discussions on the L77 6.0L V8.
Post Reply
Hzgray
Posts: 89
Joined: Sat Sep 10, 2016 1:04 am
Location: Old Dominion

Procharger install 2013 9C3

Post by Hzgray » Fri Oct 04, 2019 4:48 pm

I’ve purchased a D1SC kit. Looking at my passenger side it looks very tight to run the charger tubing in front of the fuse box. There is a plastic tray under the fuse box that extends forward about an inch that the PCM is mounted under. Will any mods be required to that part or the headlight assy to fit the tube? Looking for any hints before I start. Thanks.
2013 9C3, DoD delete, BTR Stg 1, Kooks 1 7/8, Rotofab, 3.27 Diff, VMR 810 wheels (staggered), King Springs (lowered).

Hzgray
Posts: 89
Joined: Sat Sep 10, 2016 1:04 am
Location: Old Dominion

Re: Procharger install 2013 9C3

Post by Hzgray » Fri Oct 04, 2019 6:23 pm

I think I just figured that part out but if there any good tips for the install I’d appreciate it. D1SC tuner kit with ID 1050x injectors.
2013 9C3, DoD delete, BTR Stg 1, Kooks 1 7/8, Rotofab, 3.27 Diff, VMR 810 wheels (staggered), King Springs (lowered).

kevink
Posts: 384
Joined: Sun Aug 09, 2015 5:55 pm

Re: Procharger install 2013 9C3

Post by kevink » Fri Oct 04, 2019 8:46 pm

Congrats on the Procharger kit. Whenever you get done with the installation, and if you remember, can you please let me know if you have to dent the driver's side strut tower to fit the blower?

Hzgray
Posts: 89
Joined: Sat Sep 10, 2016 1:04 am
Location: Old Dominion

Re: Procharger install 2013 9C3

Post by Hzgray » Sat Oct 05, 2019 4:41 am

Sure thing.
2013 9C3, DoD delete, BTR Stg 1, Kooks 1 7/8, Rotofab, 3.27 Diff, VMR 810 wheels (staggered), King Springs (lowered).

Post Reply