Page 1 of 1

Issues removing a Tremco interlock

Posted: Mon Jul 30, 2018 11:12 pm
by ls6-m22
I decided I want to remove the Tremco on my 2014 PPV as I don't leave my car idling unattended. Problem is I cant seem to see or reach where the two plugs go up into the steering column. Is there a way to get at these wires without removing the whole dash?

Re: Issues removing a Tremco interlock

Posted: Mon Jul 30, 2018 11:46 pm
by smwalker
THink they are going up to the ignition switch? The piece around the column just splits in half if you need to get in there. Use the tilt to lower it and extend it fully. THink in the 14 there is one 8mm screw on the bottom of the column for the cover.