Okay, so EXACTLY where is this 'green and red' wire? What size is it? Where is it? I found a small (about 18 ga.) red and green wire in the up-fitter harness in the passenger side kick panel. I connected that to 12v, and.....gregc wrote:It works like a charm. The harness is plug and play. The PPV harness plugs are plugged into each other. Just undo the plugs and plug into the module. Up front on the passenger side up fitting harness coil, just find a green and red wire. Connect it to a positive and the flights will flash. I just need to hook it up to my Whelen toggle switch and tap into a 12v.
nothing.
even with the car running, and the lights turned on. What am I missing? The flasher relay appears to be connected still.
Thanks.