Looking for B-Pillar covers, center sections....

If you're looking for a specific Caprice PPV-related part, service, or car post your requests here.
Post Reply
phastlt1
Posts: 43
Joined: Fri Mar 28, 2014 12:30 am

Looking for B-Pillar covers, center sections....

Post by phastlt1 » Mon Oct 06, 2014 2:59 am

I'm looking to delete the prisoner partition mounts on my b-pillars. The part number on the plastic covers is 740603568. Both left and right have the same part number. You can tell they were modified either at the factory or Kerr when the car came off the boat.

What I'm looking for is a pair which have no holes, so I can delete the partition mounting bungs and have a cleaner interior look. When I do an internet search, all I come up with on the part number is a Holden LS1 engine cover.

I have yet to go to a dealership, as I try and avoid them at all costs, usually because of costs, lol...Any leads on a pair of these would be greatly appreciated. Thanks

smwalker
Posts: 1393
Joined: Mon Jul 29, 2013 6:44 am
Location: Azusa,CA
Contact:

Re: Looking for B-Pillar covers, center sections....

Post by smwalker » Mon Oct 06, 2014 3:21 am

Take a look at this diagram. Is it #9 you need? They show a different part number for each side.

http://parts.nalleygmc.com/showAssembly ... bly=378096" onclick="window.open(this.href);return false;

If it is I think caprices share that part with G8's So maybe a scrapyard find is possible.
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White

phastlt1
Posts: 43
Joined: Fri Mar 28, 2014 12:30 am

Re: Looking for B-Pillar covers, center sections....

Post by phastlt1 » Mon Oct 06, 2014 10:07 am

Yep, number nine...yet again, you come thru....thanks. I couldn't find that diagram anywhere. I was thinking it was a G8 shared part also....gonna try and find me a pair...

lictor4
Posts: 9
Joined: Sun Jan 17, 2016 5:45 pm
Location: BC, Canada

Re: Looking for B-Pillar covers, center sections....

Post by lictor4 » Sun Jan 17, 2016 5:54 pm

I've got a pair from a G8

CrashTestDummy
Posts: 1723
Joined: Sat Feb 07, 2015 8:31 pm
Location: Pearland, Texas

Re: Looking for B-Pillar covers, center sections....

Post by CrashTestDummy » Sat Jan 23, 2016 5:11 pm

I went the new route with our car. I figured I'd get new while I could, parts that hadn't suffered years of kicking and pulling, and saved frustrating trips to the JY in search of the unicorn that is the Caprice. The price was right, too.
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2010 Tahoe PPV (her car)
1995 DGGM Impala SS
1996 BBB Impala SS (11-second DD)
1985 Firebird - 310 LS1 C Prepared autocross car.
And some others
Do YOU have my SPID?

Post Reply