G8 console swap~ need center support and shifter bezel
Forum rules
SPECIAL NOTE - We have no role or liability in any transactions other then to provide a venue to advertise the items. Disputes must be resolved independently between the parties involved in any transaction.
SPECIAL NOTE - We have no role or liability in any transactions other then to provide a venue to advertise the items. Disputes must be resolved independently between the parties involved in any transaction.
G8 console swap~ need center support and shifter bezel
In desperate need of the center support gm 92258108 or 92261672 and the shifter trim. Possibly a block off plate for the window controls. Let me know what you have!
Re: G8 console swap~ need center support and shifter bezel
Zach Watts is the guy behind IPF 3D printing. He has a few options for the window control hole:
https://ipf-3d-print-works.myshopify.co ... ctions/all
https://ipf-3d-print-works.myshopify.co ... ctions/all
-
- Posts: 2300
- Joined: Sat Feb 07, 2015 2:31 pm
- Location: Pearland, Texas
Re: G8 console swap~ need center support and shifter bezel
I have the console switch cubby, and it's a very nice piece. Didn't know he had branched out!
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
Re: G8 console swap~ need center support and shifter bezel
I have 2 GM 9C3 shifter bezels here in NJ ready to ship njwheel@gmail.com correct color for PPV. center support is easiest to chop up a 9C1 and G8 like Dustin has done. then install 9C3 radio trim over top. I have 2 of those available also.
2011 9C3 Caprice PPV Phantom Black
1995 MG5 Yukon GT Black
1993 Harley Davidson FLSTC Black
1995 MG5 Yukon GT Black
1993 Harley Davidson FLSTC Black
Re: G8 console swap~ need center support and shifter bezel
Ok thank you guys! I just bit the bullet and got the plate ordered for the window switch and ordered the shifter bezel. I guess I’ll gust chop up the center support
Re: G8 console swap~ need center support and shifter bezel
And just a FYI I recall someone is in the process of creating a 3D printed center support piece. That will be great if they can pull it off.
-
- Posts: 604
- Joined: Mon Sep 11, 2017 5:17 am
- Location: North Jersey
Re: G8 console swap~ need center support and shifter bezel
Nice! I think 3D printing will be somewhat of a saving grace for these hard to find/NLA parts.
Great... now my wife will shoot me when I say in a few years, "Hey it's time for another Caprice, but it's ok the parts are 3D printed and it will be easy to acquire them this time!"
Great... now my wife will shoot me when I say in a few years, "Hey it's time for another Caprice, but it's ok the parts are 3D printed and it will be easy to acquire them this time!"
2012 Caprice
2008 CVPI
Both gone but not forgotten...
2008 CVPI
Both gone but not forgotten...