Passenger Wiper Arm
Forum rules
SPECIAL NOTE - We have no role or liability in any transactions other then to provide a venue to advertise the items. Disputes must be resolved independently between the parties involved in any transaction.
SPECIAL NOTE - We have no role or liability in any transactions other then to provide a venue to advertise the items. Disputes must be resolved independently between the parties involved in any transaction.
Passenger Wiper Arm
Anyone got one to sell, or a part number for the passenger wiper arm. Mines not grabbing anymore. Thanks.
2011 Caprice 9C1 Phantom Metallic Black
Re: Passenger Wiper Arm
The arms just go on a serrated taper and that style attachment are known to get loose and quit working. Have you tried to tighten the attachment nut?
David
David
Re: Passenger Wiper Arm
Yes I've tried tightening it. It appears to have teeth on the actuator, but the arm doesn't as if it's supposed to for grip.
2011 Caprice 9C1 Phantom Metallic Black
Re: Passenger Wiper Arm
Maybe I can just tap it and put a set screw.
2011 Caprice 9C1 Phantom Metallic Black
Re: Passenger Wiper Arm
I don't think there are any splines/serrations on the wiper arm. If it has been run loose before, it may have chewed out some the material off of the arm and the nut bottoms out on the wiper arm shaft before it pushes the arm down on the splined shaft. I would add a flat washer between the arm and the nut, if the arm is worn, to prevent the nut from bottoming out, if that is the problem. I don't think a set screw will do you any good.
David
David