New Caprice - Discussion forums

how much ? and is it for the WHOLE set up ?

great info !

thank you steve !!

same work as a G8 or SS , all been done

it will raise the back of the car up some from what i remember

ask steve , user id is smwalker

he is pretty good with getting diagrams

92248513 , list is 131

id buy a new one , over getting a used one , unless you are just using it to test a possible issue

have you checked the wiring from the sensor all the way to the module ? and no 12 and 14 are way different , the 14 module is a 1 year only part # , and shared with the 14 SS sedan 11-13 are a front and rear system , and the 14-17's are a cross system , 1 front and 1 rear are on the same master cyli...

the OE top and bottom washers are different , in the gto and G8 the washers were the same , at some point GM changed them , this is the part # 92273396 from bulletin # 16-NA-010 unfortunately we do not stock them , so i can not take a picture , also i wont have any time tell next week to take any pi...

that top washer the OE part , or the whiteline part ?

did you reuse the right washer on top ?

This is probably a dumb question but can you please explain what that means? Is this problem related to the order of attaching all the pieces? -J its the angle at which the mount and cup in the body come together i would think so yes , it would require undoing the strut to the spindle , then loosen...

the mount was located into the cup before being lowered down , i locate the mount before attaching them to the spindle