New Caprice - Discussion forums

have you checked the wiring from the sensor all the way to the module ? and no 12 and 14 are way different , the 14 module is a 1 year only part # , and shared with the 14 SS sedan 11-13 are a front and rear system , and the 14-17's are a cross system , 1 front and 1 rear are on the same master cyli...

the OE top and bottom washers are different , in the gto and G8 the washers were the same , at some point GM changed them , this is the part # 92273396 from bulletin # 16-NA-010 unfortunately we do not stock them , so i can not take a picture , also i wont have any time tell next week to take any pi...

that top washer the OE part , or the whiteline part ?

did you reuse the right washer on top ?

This is probably a dumb question but can you please explain what that means? Is this problem related to the order of attaching all the pieces? -J its the angle at which the mount and cup in the body come together i would think so yes , it would require undoing the strut to the spindle , then loosen...

the mount was located into the cup before being lowered down , i locate the mount before attaching them to the spindle

glad you got it taken care of now

time will tell if there was any damage or not , hopefully it comes up before your warranty is up

are they a 18x8 ? i would guess they are the same or very close to the same as the 18x8 g8 v6 wheel , if you search the g8board , you should be able to find how much spacer they needed for the front wheel to clear the caliper

which wheels do you have ? pictures ?

sounds like the level is low , also id quit driving it tell you get it checked

the offset has nothing to do with clearing the brakes , its all in the wheels design

the steel wheel is lucky it clears the brembo's

most factory holden wheels were not made to clear brembo's