Search found 892 matches
- Mon Nov 27, 2023 1:46 pm
- Forum: Stereo / Electronics / Electrical
- Topic: Whole Instrument cluster does not work with BCM codes!
- Replies: 8
- Views: 1174
Re: Whole Instrument cluster does not work with BCM codes!
Would I be wrong in saying that some of the IP cluster information is via a serial bus circuit?. Also, doesn't the IP cluster need to be VIN synced? This keeps people from swapping out IP clusters for a lower odometer reading. All of the modules need the VIN to talk to each other, including the radi...
- Thu Nov 09, 2023 10:35 am
- Forum: New user - intro forum
- Topic: Hello from North Texas
- Replies: 8
- Views: 1520
Re: Hello from North Texas
My 2011 9C3 has a BTR Stage 1 cam, stock converter and 3.45 gears, tuned by Chris Henry Motorsports. It is drivable in stop and go traffic. It doesn't push against the converter.
Maurice
Maurice
- Wed Nov 08, 2023 9:12 am
- Forum: Caprice PPV's for sale
- Topic: 2012 Caprice ppv good deal
- Replies: 16
- Views: 3279
Re: 2012 Caprice ppv good deal
I would suggest that you post some pictures, provide a location, etc. This add could be removed as you are below the threshold of number of posts...
Regards,
Maurice
Regards,
Maurice
- Fri Nov 03, 2023 10:25 am
- Forum: V6 Engine tech (LFX)
- Topic: LFX WOT pre-programmed limit
- Replies: 1
- Views: 895
Re: LFX WOT pre-programmed limit
Eric, I believe that with "drive by wire" and the stepper motor controlled throttle, we will see that. The computer knows that at the lower RPM's the motor isn't needing a physical WOT. It sees the request for WOT, but it is managing the request. The Mass Air Flow sensor knows a lot about ...
- Tue Oct 31, 2023 3:09 pm
- Forum: V8 engine tech (L77)
- Topic: Brian Tooley Red Hot Cam Help.
- Replies: 4
- Views: 867
Re: Brian Tooley Red Hot Cam Help.
Jester, When I went with a BTR Stage 1 cam I worked with Chris Henry Motorsports. He is a member here. He had prior experience with this cam in the G8's. I used HP Tuners to upload the tune and to data log the results. (Having HP Tuners has come in handy for me to scan for codes, tire size changes o...
- Tue Oct 31, 2023 9:22 am
- Forum: V8 engine tech (L77)
- Topic: Brian Tooley Red Hot Cam Help.
- Replies: 4
- Views: 867
Re: Brian Tooley Red Hot Cam Help.
I would suggest that it needs to be tuned by someone familiar with the camshaft at least. The stock tune can't handle managing the new airflow in and out of the motor, the new converter is beyond the stock, tight transmission tune.
Regards,
Maurice
Regards,
Maurice
- Sat Sep 30, 2023 7:39 pm
- Forum: Suspension / Brakes / Steering
- Topic: What breaks will fit stock 18-in rims? Besides the OEM?
- Replies: 6
- Views: 1219
Re: What breaks will fit stock 18-in rims? Besides the OEM?
Here is what I did... https://www.newcaprice.com/forum/viewtopic.php?f=18&t=1488&hilit=cts+brembo. We had to swap the lead/lag pistons around on these due to their brake bleeder orientation. Just search "Brembo' and there are a lot of threads that have already discussed this... Maurice
- Thu Sep 07, 2023 11:44 am
- Forum: Body, Appearance, Interior, & Detailing
- Topic: Front fender vent removal
- Replies: 3
- Views: 639
Re: Front fender vent removal
If I remember correctly, I just squeezed the horizontal bar in the middle to pull the top and bottom together.
Maurice
Maurice
- Tue Aug 22, 2023 8:37 am
- Forum: Wheels / Tires
- Topic: Lugnut issues
- Replies: 6
- Views: 885
Re: Lugnut issues
It sounds like somebody replaced the factory lugnuts with aftermarket ones. The factory lugnuts were open with a threaded outer to attach the full size hubcap. Maybe try an SAE socket to find the right size?
Maurice
Maurice
- Sun Aug 20, 2023 1:28 pm
- Forum: Caprice PPV's for sale
- Topic: 2017 PPV - testing the waters.
- Replies: 16
- Views: 2305
Re: 2017 PPV - testing the waters.
This a very well optioned car. Just read the window sticker. Trunk mat, interior carpeting and floor mats, heated outside mirrors, full wheel covers...
Good luck with sale, Steve!
Maurice
Good luck with sale, Steve!
Maurice