New Caprice - Discussion forums

Where you getting all the tuning software/tuner to run all those engine upgrades? Have you done anything to drive train? Great sounding and performing rig Dave Hi Dave Car was tuned here in my Country by one of My friend with EFI-Live (Engine+Trans) I changed my Diff from 2.92 non LSD to the same r...

Who makes the GT-12 cam? Any specs? Maurice LINGENFELTER Specs 227/235 duration @ .050 lift - .614/.621 lift with 1.7 rocker 115 CL Great Muscle Car Sound Link http://www.lingenfelter.com/mm5/merchant.mvc?Screen=PROD&Store_Code=LPE&Product_Code=L210165897&Category_Code=C280#.U9qQDLIgGK0...

Tariq, Congrats on the mod! Do you feel the difference right from off-of-the-start or later in the RPM range? I will probably do what you did, in a year or so. I might go with cam that builds more torque quicker due to the weight of our cars. Way to jump into a major modification, it takes dedicati...

Gerome wrote:Love the sound ! You have a good setup .

Thanks

Hi VCM OTR CAI Kooks LT Headers 1.7.8 Kooks x pipe O/R X force 3in mufflers (Remote Control) Varex system DOD Deleted Ported intake manifold by Rick Crawford LS7 Camshaft Tuned Making 426 RWHP / 401 RWTRQ (STD) on dyno jet Video http://youtu.be/xT0DY8UPX2Y" onclick="window.open(this.href);...

Navy Lifer wrote:should be "perfect"....assuming there are no clearance issues between back side of wheel spokes & caliper

What is the width of these wheels?

18"
And going for 245-45-18 Tires
The Malibu OE tires are 235-50-18
And r u sure that our Caprice CB is 66.9mm??

Hi
I'm going to change my diff from No LSD to the LSD one
So do I need to change any thing in Rear Axel????

Bill
the center bore for Malibu wheel is 66.90mm and the offset is: 42mm

I don't know is this Good or No?

from your link: http://www.g8board.com/forums/showthread.php?t=58833" onclick="window.open(this.href);return false; "I ended up disconnecting the leds in the steering wheel to utilize that wire in the clock spring. Like many have said, it looks like the onstar buttons are all tied in...

Well, learning something about this--looks doable, so I see where you're coming from....I had thought it was more complex than it appears to be. I can get parts for you, no problem, and I'd say the linked thread gives you most or all of the other information and installation procedure details. Drop...