New Caprice - Discussion forums

If you have cylinder misfiring, you should be getting a CEL. I believe misfire detection can be turned off with HP Tuners, but I may be wrong. Get a noid light and see if you are getting a signal to #7 injector. Might want to run a normal compression test and also a running compression test on #7 al...

What was the fix? Let us know as it might help someone with a similar problem.

If your safety latch is hitting the core support, your hood is probably bent on the underside where the safety latch pivots. It can be bent back so the latch clears the core support.

If I remember correctly, the first design had more problems with the lifter internals hanging up. Pretty sure the Caprices use a second design/different manufacturer. I would find out what side has failed and pull the valve cover and see what moves when cranking. I had one that the valves moved fine...

I have three cars that came from Garland. We named one after the officer that left a bunch of business cards in it. They were all slick tops.

If have a dial caliper, you should be able to get some dimensions of the joint without removing it. A decent part store should be able to find a joint using your dimensions.

https://www.actionmachineinc.com/collec ... in-u-joint

Just found this. Will have to do some poking around on the site.

I haven’t seen one with removable clips. It may have been modified at some time in the past. A decent part store should be able to get a part number for the joint if you can get the dimensions.

The caps are staked in. You might find a driveshaft shop that can do something with it, but it won’t be inexpensive like an old school u-joint.

What year car?