New Caprice - Discussion forums

Oh like the green and red!

Z09SS wrote: ↑Sat Apr 22, 2023 6:12 pm How did you get them apart to access the LED?

YEa you gotta yank off the dial. Not sure anyone has ever done a video on breaking one of those down but we need to. That dial is a pisser.

Actually no if I rememeber right you pop off the back dial off the stem. Cant remember now!

The site is keeping me logged in now. Used to always clear me out. That's an improvement!

I make the harnesses for the SS shifter. Info in this thread if you want to build your own:

viewtopic.php?f=21&t=4321#p32367

That's a good vid. He also shows how to completely blank out the VIN so the radio look s like a new one to any car it is installed in.

if anyone wants to give the Mitchell ProDemand a try you can use this link.

Click on Mitchell link (https://www.prodemand.com/)
Click Login
Username = SalemPL
Password = Salem1

Good info on the permanent codes. The state does the 200/15 thing to help people get through the process. They figure if a code does not come back current in that time it is probably OK. Covered here: https://www.bar.ca.gov/Industry/PDTC So now that we know we got a pass the question is how much can...

Dudzikzzz wrote: ↑Fri Feb 24, 2023 11:10 am It's already working. There was a disconnected plug, :⁠-⁠)

Many departments disconnect that to prevent the burn outs behind the donut shop.

view: https://appcontent.chiltonlibrary.com/c ... 950779.pdf

Install the knock sensor to engine block retaining bolt (1) and tighten to 25 N·m (18 lb ft).

Another view, #6 is Knock Sensor
https://appcontent.chiltonlibrary.com/c ... 462811.pdf

The bezels to add the fog lights are becoming few and far between now with supplies in AU drying up

Saw someone was 3D printing some the other day on FB.