Search found 358 matches
- Sat Feb 11, 2023 7:55 am
- Forum: Intake/Exhaust/Fuel tech
- Topic: Muffler flange
- Replies: 4
- Views: 4810
Re: Muffler flange
You need to get ahold of an oxy/acetylene torch and heat the head of the bolt until it is red and then quench with water. If it does not turn loose, you may have to reheat. If there is any bolt sticking out on the broken one, you can just heat the threaded end. This method has worked good for me for...
- Tue Feb 07, 2023 6:46 pm
- Forum: Suspension / Brakes / Steering
- Topic: Superpro trc1001
- Replies: 3
- Views: 1156
Re: Superpro trc1001
Pretty sure the G8’s and the Caprice are different parts due to the taper.
- Tue Feb 07, 2023 6:44 pm
- Forum: HVAC & cooling systems
- Topic: No low speed cooling fans when AC operating - part number needed!
- Replies: 17
- Views: 2655
Re: No low speed cooling fans when AC operating - part number needed!
Need to get a good scan tool hooked up to it and see what the coolant temp sensor is showing and see what codes you have. Best to hook it up cold to confirm the sensor is showing close to the ambient temp. What does your temperature gauge show when it burps put the coolant?
- Sat Feb 04, 2023 8:39 pm
- Forum: Police equipment/options & upfitting
- Topic: Flasher module
- Replies: 14
- Views: 2600
Re: Flasher module
What year car do you have?
- Fri Feb 03, 2023 12:28 pm
- Forum: Police equipment/options & upfitting
- Topic: Flasher module
- Replies: 14
- Views: 2600
Re: Flasher module
On the 11-13’s, there is a small green/red tracer wire that is in the bundle of wires at the passenger kick panel that is used for upfitting. If you put 12 volts to the wire, that should energize the flasher module. Don’t know if it is the same as the 14-17’s, as I don’t have one in my fleet.
- Tue Jan 31, 2023 8:58 pm
- Forum: Body, Appearance, Interior, & Detailing
- Topic: Front bumper reinforcements
- Replies: 11
- Views: 1536
Re: Front bumper reinforcements
Make sure you clean up the inserts and anti-seize grease the bolts up, before you have it bolted up. There are a couple folks on FB that are taking flat bar, drilling holes through it and the tacking/welding bolts on it. They use them to eliminate the inserts. the mickey mouse fix for a issue we do...
- Mon Jan 30, 2023 7:06 pm
- Forum: Body, Appearance, Interior, & Detailing
- Topic: Front bumper reinforcements
- Replies: 11
- Views: 1536
Re: Front bumper reinforcements
Make sure you clean up the inserts and anti-seize grease the bolts up, before you have it bolted up. There are a couple folks on FB that are taking flat bar, drilling holes through it and the tacking/welding bolts on it. They use them to eliminate the inserts.
- Fri Jan 13, 2023 12:56 pm
- Forum: HVAC & cooling systems
- Topic: Air Conditioning Evaporator Thermal Expansion Valve Tube Product ID: 92285455
- Replies: 4
- Views: 1304
Re: Air Conditioning Evaporator Thermal Expansion Valve Tube Product ID: 92285455
Might want to hang on to the old hose assembly. They can be repaired some times or they can be a donor to fix another hose. At the rate GM discontinuing parts, there is no telling how long they will be available. Wish I could get my hands on some the old ones that are getting replaced, but with the ...
- Mon Jan 09, 2023 3:05 pm
- Forum: General Discussion
- Topic: Verifying 9C3
- Replies: 10
- Views: 1559
Re: Verifying 9C3
Take the VIN to a local GM dealer and let them print out a build sheet.
- Sun Jan 08, 2023 9:10 pm
- Forum: Stereo / Electronics / Electrical
- Topic: Cleanest way to open up rear door speakers on an 11-13?
- Replies: 4
- Views: 514
Re: Cleanest way to open up rear door speakers on an 11-13?
I am guessing that you have a 13. I would keep an eye out for some 11-12 rear door panels and install a pair. Can’t help with the center speaker info.