New Caprice - Discussion forums

Looking for our mirror connectors I came across what appears to be our BCM Connectors. Made by JST: JST HIT 0.64 and 2.8mm Connector Line EDIT: Further research shows these terminals from JST are also used in the 2014+ BCM's. Here is a listing of the X1 BCM plug on a 14+ Car: https://i.imgur.com/a79...

jackleg wrote: What's Engineering Mode" I don't see that anywhere.

Hold the steering wheel scroll button while you start the car and it comes up on the DIC

Video of it

Note : Only available on 11-13 Caprices

Did you go into Engineering Mode on the vehicle to see what that said?

It has begun:



I think the roof is going to benefit the most from it, there is nothing up there from the factory.



But each of the doors got one big ol piece of deadner on the inside:

I would try a new radiator cap. That ain't right.

I haven't looked at J218 yet, will I need a terminal to connect there, and if so, any idea what one? For General Motors schematics I believe they follow this rule. "J" are for Junctions, meaning just a splice together within the harness. This is usually done with a solder joint and some s...

Deleted post - Moral - DO not wire repeaters to the wires going to the rear of the vehicle or your repeaters wll come on with your brake lights. Not cool. Get the tun signal wires going to the front headlights.

So this will be just a general guide on how to install a fog light relay harness and bulb harness for the 2011-2013 Caprice (2014 + fuse boxes are different I believe but all the rest should apply). I plan on making the bulb harnesses so we do not have to buy the ones from AU but this guide should w...

Could you post a side shot of them? Like to see ow they tuck in there.

Robert what color are your steering wheel buttons? Silver? I have a pair of silver with red LED's I could try and put white LED's in. They are even smaller than the headlamp though so may be beyond the capabilities of my fat fingers. But I would be happy to give it a try. But the reds are kind of co...