New Caprice - Discussion forums

I'm not sure how metal shavings would get into the intake, but your pics look like road dirt to me. Maybe you're running a crummy filter or the filter failed, or the tubing.... Something is letting unfiltered air in there. Joe I dont know how either, it just kind of appeared, i checked my filter an...

My car has been misfiring for a while on cylinders 4,6,and 8 and i thought i had it figured out by tightening my rocker arms however the issue still persisted, there was no metal shavings while i had the intake manifold off. So with the issue still there I took it to a trusted mechanic to diag it wh...

I am having trouble getting my vehicle to drive again. Its a 2015 caprice with a dod delete, cam, and a tune. It started misfiring one day. Several rocker arms had come loose, so I put some teflon tape around the threads and blue loctite under the head of the bolt and torqued them all down properly....

JoeR wrote: ↑Wed Feb 21, 2024 7:39 pm You need to use fuel line quick disconnect tools. Get the plastic ones. They're not too expensive and work just fine.
Joe

Thanks dude, I ordered a set that was too long so I had to shave down the tool, but with that and some pliers i got it off.

I need the starter heat shield including the 3 bolts, im located in Southwest florida. If anyone has an extra or are parting out, I would greatly appreciate one.

I am having trouble removing the fuel pump on my 2015 Caprice, I was able to disconnect the electrical connection, but the fuel line connection is a different story, I have tried everything from pushing in pinching the sides and removing to getting a fuel line removal tool, but nothing is working. I...

If you have cylinder misfiring, you should be getting a CEL. I believe misfire detection can be turned off with HP Tuners, but I may be wrong. Get a noid light and see if you are getting a signal to #7 injector. Might want to run a normal compression test and also a running compression test on #7 a...

If you have cylinder misfiring, you should be getting a CEL. I believe misfire detection can be turned off with HP Tuners, but I may be wrong. Get a noid light and see if you are getting a signal to #7 injector. Might want to run a normal compression test and also a running compression test on #7 a...

I got my car tuned for my dod delete a few weeks ago, and on the way home after turning a right thr car started driving funny and misfiring, I figured it was an issue with the tune, because there were no codes. Anyway I had to fix a couple things unrelated to the engine and bring the car back to fin...

I have a pair of oem headlight housings I am selling, I must warn you they are really crusty and dusty, one tab is broken on the passenger side housing but I will put in the packaging so you can reattach it. Also the headlights will need to be take apart cleaned and the inside of the clear lense nee...