Search found 725 matches

by s/c'd cav
Sun Sep 22, 2019 5:16 am
Forum: Body, Appearance, Interior, & Detailing
Topic: 2014+ SS Dash Swap
Replies: 3
Views: 70

Re: 2014+ SS Dash Swap

you need the shifter assembly , and the rod from the shifter to the trans , i got mine new from the dealer , it was cheaper and in better shape than what i saw as used parts out there , weather is finally getting in line so i can work on it soon
by s/c'd cav
Fri Sep 20, 2019 3:57 pm
Forum: Body, Appearance, Interior, & Detailing
Topic: 2014+ SS Dash Swap
Replies: 3
Views: 70

Re: 2014+ SS Dash Swap

all you are swapping is the outter plastic shell , so yes everything from the caprice still works with it , all GM did for the caprice is chop off the console section to fit the upfitter plate i dont think anyone has done the hud , or moved the sport/tc buttons you are pretty much on your own for th...
by s/c'd cav
Fri Sep 20, 2019 3:50 pm
Forum: Stereo / Electronics / Electrical
Topic: Installing factory rear vision camera on 2014
Replies: 27
Views: 15308

Re: 2014+ Rearview Camera Technical Info

smwalker wrote:
Fri Sep 20, 2019 9:32 am
s/c'd cav wrote:
Fri Sep 20, 2019 9:12 am
if you need a harness tester let me know , my camera and trim are waiting
Did you get the GM Camera Harness as well?
Should know by Monday if we are good to go. Thanks for the offer.
yes i do , from the camera to just inside the trunk
by s/c'd cav
Fri Sep 20, 2019 3:49 pm
Forum: New user - intro forum
Topic: New owner from Georgia, hello!
Replies: 4
Views: 91

Re: New owner from Georgia, hello!

A 9C3, good....so where in GA are you located? s/c'd, either I missed that you were in AZ, or you have relocated--yes or no? I always thought you were upper midewest somewhere, or have confused you with someone else. im a california kid , and been here in AZ about 22 years i cant deal well with col...
by s/c'd cav
Fri Sep 20, 2019 9:12 am
Forum: Stereo / Electronics / Electrical
Topic: Installing factory rear vision camera on 2014
Replies: 27
Views: 15308

Re: 2014+ Rearview Camera Technical Info

smwalker wrote:
Tue Sep 10, 2019 8:40 am
So This is what I came up with. Still have to install in another members car and see if the lengths we came up with will work.

if you need a harness tester let me know , my camera and trim are waiting
by s/c'd cav
Wed Sep 18, 2019 3:45 pm
Forum: New user - intro forum
Topic: New owner from Georgia, hello!
Replies: 4
Views: 91

Re: New owner from Georgia, hello!

how many times did he change pricing on you ? that car for the miles has had a hard life , it did drive nice
by s/c'd cav
Tue Sep 17, 2019 4:16 pm
Forum: Wheels / Tires
Topic: New Tires - What Air Pressure to Run?
Replies: 3
Views: 110

Re: New Tires - What Air Pressure to Run?

what the sticker says
by s/c'd cav
Mon Sep 16, 2019 4:17 pm
Forum: Member builds
Topic: FuzzKill's LS3/6MT Caprice
Replies: 14
Views: 11946

Re: FuzzKill's LS3/6MT Caprice

highway903 wrote:
Sun Sep 15, 2019 8:04 pm
How did the G8 carpet fit? Was it short?
yes its short , the caprice carpet is still available , and there is a post i made with part #s for it
by s/c'd cav
Tue Sep 10, 2019 4:35 pm
Forum: Drivetrain tech
Topic: 3.45 Differential install
Replies: 66
Views: 42186

Re: 3.45 Differential install

This is newer SI, but no idea why G8 (or CP) called for a different spec for the same fastener. On the same note, G8 early production had wheel nut torque of 125 lb-ft, and PPV has always called for 140 lb-ft, as has all other Zetas since Gen5 Camaro, with exact same wheel studs. I'll see whether c...
by s/c'd cav
Sat Sep 07, 2019 12:38 am
Forum: White Auto & Media
Topic: Smoking Deal on BRAND NEW SS Custers!!
Replies: 2
Views: 122

Re: Smoking Deal on BRAND NEW SS Custers!!

oh , sure now you offer them , and ive got a used one sitting and waiting

lol