Search found 8 matches
- Thu Mar 05, 2020 7:10 pm
- Forum: Caprice PPV Parts for sale
- Topic: 2014 LS3 complete w/ accessories, harness, ECU, etc. low miles
- Replies: 0
- Views: 2458
2014 LS3 complete w/ accessories, harness, ECU, etc. low miles
Picked up this wrecked '01 WS6 with a 2014 LS3 in it. I don't know exact mileage but dude that purchased vehicle in 2015 did the swap when the car had around 130K on it. Currently car has a little over 160k so I think I can safely say that the motor has less than 50k on it. Motor runs great, only dr...
- Mon Aug 05, 2019 4:18 pm
- Forum: Caprice PPV Parts for sale
- Topic: 2012 ppv parts
- Replies: 12
- Views: 21573
Re: 2012 ppv parts
PM sent
- Mon May 20, 2019 10:32 am
- Forum: V8 engine tech (L77)
- Topic: oil pressure sender issues
- Replies: 9
- Views: 25994
Re: oil pressure sender issues
I got the same light. When looking the part up I found oil pressure switch, and oil pressure sensor. Doesn anyone have the AC Delco part number they used?
- Fri Mar 29, 2019 11:25 am
- Forum: Intake/Exhaust/Fuel tech
- Topic: Fuel Pump Access Under Back Seat?
- Replies: 13
- Views: 31897
Re: Fuel Pump Access Under Back Seat?
Turn out the pump is fine, but the harness connector had a burnt terminal. I 'm replacing the harness tonight. Anyone have any experience with this? Can I lower the fuel tank without having to drop it completely?
- Fri Mar 29, 2019 11:20 am
- Forum: Member builds
- Topic: My 2012 Idling after DOD delete + "necessary" upgrades
- Replies: 0
- Views: 10860
- Wed Mar 20, 2019 11:57 am
- Forum: Intake/Exhaust/Fuel tech
- Topic: Fuel Pump Access Under Back Seat?
- Replies: 13
- Views: 31897
Re: Fuel Pump Access Under Back Seat?
Thanks Steve!
- Wed Mar 20, 2019 9:26 am
- Forum: Intake/Exhaust/Fuel tech
- Topic: Fuel Pump Access Under Back Seat?
- Replies: 13
- Views: 31897
Fuel Pump Access Under Back Seat?
Hey everyone, I don't want to drop the tank to install my new fuel pump, I want to cut out an access hole under the back seat. I've seen people talking about it, but not in enough detail. If anyone has information and/or pictures to help me figure out where I need to cut the hole, I'd greatly apprec...
- Wed Mar 20, 2019 9:18 am
- Forum: New user - intro forum
- Topic: Friggin new guy
- Replies: 1
- Views: 2982
Friggin new guy
Hey everyone, bought a 6.0 9C1 last summer. Had to do the old DOD delete so of course I had the heads built and all that stuff. It's a fuel pump away from running. Going to research that section to try and figure some crap out.